The 1200℃ double temperature zone tubular furnace is a small tubular resistance furnace for laboratory use

1200℃ dual zone tube furnaces use the famous coil wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller with +/-1 °C accuracy and 40 programmable segments. Furnace housing is built with double-layer steel and two cooling fans inside keep the furnace body temperature low. Furnace tube is sealed by stainless steel vacuum sealing flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use.

These furnaces have built-in interface to a computer. We provide connection cable, adaptor and software that can be used to control the temperature and parameters of the furnace, all from your PC! You can also save a temperature curve for record or study purposes.

Safety features

1、Furnace overheat protection cuts off power when temperature is over the desired range.
2、Thermocouple protection cuts off power when the thermocouple is broken or malfunctioned.
3、Temperature variation protection cuts off power when the difference between actual temperature and target temperature is off the desired range. (refer to controller’s manual)
4、Power failure protection resume furnace operation right after the point of failure when power is back up.
5、Stainless steel flange support makes sure the tube and flanges are secure and in their absolute position, it also longer the life of the tube

6、Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.

Specifications：

Name	1200℃ dual zone tube furnace
Electrical requirements	208-240V, single phase, 50/60 Hz
Tube material	High purity quartz
Min. working temperature	Ambient
Max. working temperature	Zone1/Zone2: 1200°C
Max. constant working temperature	Zone1/Zone2: 1100°C
Constant working temperature under vacuum	1000°C
Rated vacuum pressure	0.001 Pa / 0.0075 millitorr / 0.00001 mbar
Rated positive pressure	0.02 MPa / 150 torr / 3 psi
Refractory lining	Mitsubishi (Japan) high quality 1500 grade fiber alumina
Heating element type	Zone1/Zone2: Kanthal (Sweden) A1 2.0 coil wire
Thermocouple type	Zone1/Zone2: K
Temperature controller	Shimaden fp93 (Japan) with 4 patterns and 40 segments (i.e. 4 x 10 segments or 2 x 20 segments)
Max/recommended heating rate	20°C/min 10°C/min
Heating zone length	Zone1: 8 inches Zone2: 8 inches
Constant temp zone length	Zone1: 4 inches Zone2: 4 inches
Temperature controller precision	+/- 1°C
Vacuum level (cold)	0.1 Pa
Vacuum sealing flange kit	Stainless steel vacuum sealing flanges with one vacuum gauge, two valves and four thermal ceramic blocks.
Compliant	ETL tested to UL and CSA standards (optional), CE
Download	Product brochure

Size comparison

Tube size (OD x length)	60mm x 1m	100mm x 1m	150mm x 1m
Maximum output	3 kW	4 kW	5.5 kW
Furnace dimensions (LxWxH)	24x16x23″	25x16x24″	26x18x26″

How to Program Across International Furnaces

厂家有哪些？ 厂家电话？